26 AWG, Average wire diameter: 0.0159 in. (0.40386 mm), 0.2373 Ohms/ft at 68°F Nickel 200 (99.6% commercially pure). Rated for temperatures up to 1446°C (2635°F). 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A. PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool. ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.

Nickel 200 is a ferromagnetic, commercially pure (99.6%) wrought Nickel with good mechanical properties over a wide range of temperatures, high ductility, and excellent resistance to many corrosives (in particular hydroxides). Ni 200 is used for a variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers and alkalies. Nickel 200 has roughly the strength of mild steel when annealed. Its low annealed hardness and very low work-hardening rate makes it desirable for cold forming operations such as deep drawing, spinning, coining, etc. Used in corrosion-resistant equipment such as caustic evaporators, spun anodes, combustion boats and laboratory crucibles, and electronic components where its excellent fabricating characteristics provide an advantage. Nickel 200 exhibits good thermal and electrical properties. Its magnetostrictive properties (specifically significant length change when magnetized) make it ideal for use in sonic devices such as sonar or for control in ultrasonic welding. Made in the USA.